Poe Legacy Enable; Poe Enable Pse - 3Com S7906E Command Reference Manual

[Sysname-Ethernet2/0/1] poe enable
# Enable PoE on a PoE interface through a PoE configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe enable
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] apply poe-profile name abc

poe enable pse

Syntax
poe enable pse pse-id
undo poe enable pse pse-id
View
System view
Default Level
2: System level
Parameters
pse-id: PSE ID.
Description
Use the poe enable pse command to enable PoE for the PSE.
Use the undo poe enable pse command to disable PoE for the PSE.
By default, PoE is disabled for the PSE.
Examples
# Enable PoE for PSE 7.
<Sysname> system-view
[Sysname] poe enable pse 7

poe legacy enable

Syntax
poe legacy enable [ pse pse-id ]
undo poe legacy enable [ pse pse-id ]
View
System view
Default Level
2: System level
1-25