Adc Main Features - ST STM32G0 1 Series Reference Manual

Analog-to-digital converter (ADC)
15.2

ADC main features

• High performance
–
–
–
–
–
–
•
Low-power
–
–
–
•
Analog input channels
–
–
–
–
•
Start-of-conversion can be initiated:
–
–
•
Conversion modes
–
–
–
–
•
Interrupt generation at the end of sampling, end of conversion, end of sequence
conversion, and in case of analog watchdog or overrun events
•
Analog watchdog
•
Oversampler
–
–
–
•
ADC supply requirements: 1.62 to 3.6 V
•
ADC input range: V
344/1390
12-bit, 10-bit, 8-bit or 6-bit configurable resolution
ADC conversion time: 0.4 µs for 12-bit resolution (2.5Msps), faster conversion
times can be obtained by lowering resolution.
Self-calibration
Programmable sampling time
Data alignment with built-in data coherency
DMA support
The application can reduce PCLK frequency for low-power operation while still
keeping optimum ADC performance. For example, 0.4 µs conversion time is kept,
whatever the PCLK frequency)
Wait mode: prevents ADC overrun in applications with low PCLK frequency
Auto off mode: ADC is automatically powered off except during the active
conversion phase. This dramatically reduces the power consumption of the ADC.
16 external analog inputs
1 channel for internal temperature sensor (V
1 channel for internal reference voltage (V
1 channel for monitoring external V
By software
By hardware triggers with configurable polarity (timer events or GPIO input
events)
Can convert a single channel or can scan a sequence of channels.
Single mode converts selected inputs once per trigger
Continuous mode converts selected inputs continuously
Discontinuous mode
16-bit data register
Oversampling ratio adjustable from 2 to 256x
Programmable data shift up to 8-bits
≤ V
SSA
REFINT
power supply pin
BAT
≤ V
IN REF+
RM0444 Rev 5
)
SENSE
)
RM0444