Point Sorting And Filters; Sorting And Filters For Points, Lines And Areas - Leica TPS1200+ Field Manual

8.4

Point Sorting and Filters

8.4.1

Sorting and Filters for Points, Lines and Areas

Description
Access
step-by-step
MANAGE
Sorts & Filters,
Points page
Manage...\Data
The sort settings define the order of the objects in the active job. The filter settings
define the objects to be viewed.
An active filter for an object is indicated in MANAGE Data: Job Name by
on the right hand side of the page name.
The sort and filter settings are stored in the job. They are remembered after turning
off the instrument and are copied to a new job.
When a job becomes active, then the sort and filter settings of this job are saved in
the SystemRAM. If the CompactFlash card is formatted then these last used sort and
filter settings are used for the job Default.
Step Description
Refer to "6 Manage... - Getting Started" to access MANAGE Data: Job
1.
Name.
In MANAGE Data: Job Name on the Points, Lines (X) or Areas (X)
2.
page, SHIFT FILT (F5) to access MANAGE Sorts & Filters.
MANAGE Sorts & Filters
3.
The page for an object is displayed when the equivalent page is displayed
in MANAGE Data: Job Name.
The functionality on the Lines (X) and Areas (X) page is similar to that on the Points
page. For simplicity, only the Points page is described.
The available fields on this screen depend on the selected setting for <Filter:>.
Description of fields
Field Option
<Sort:> Ascend Point ID,
Descend Point ID,
Forward Time or
Backward Time
CONT (F1)
STAKE (F5)
Description
Always available. The method by which
points are sorted.
TPS1200+
To close the screen and return to the
screen from where this screen was
accessed.
To filter points for the Stakeout appli-
cation program.
located
51