Surveying Intemediate Points - Leica DNA03 User Manual

Surveying intemediate points

There are two displays for the intermediate sight:
a) Height difference as related to the backsight (Pt
to BS)
b) Height difference as related to the previous
intermediate point (point to point).
Point ID is incremented after each
measurement.
Starts measurement display for intermediate
points.
First enter all required values and then trigger the
measurement.
INTERMEDIATE (BS to Pt)
Next:
Pt2 :
Staf: ----.---- m
Dist:
dH : ----.---- m
Pt2H: ----.---- m
<QUIT> <Pt to Pt>QC
1001
------
EC
---.-- m
DNA-Dde 14
Entries:
Next:
Enter the point number to be measured next. Point
numbers are sequential and are incremented with
every measurement.
After the measurement
Pt2:
The point number of the current measured point
Staff:
The staff reading of the current measured point
dH:
The height difference from point-to-point to back-
sight point
Pt2H
The height of the current measured intermediate
point.
<Pt to Pt>
Switches to display "point to point"
<QUIT>
Exit intermediate sight, return to foresight.
62