Offset Points Of Auto Points; Overview - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

Survey - Auto Points

Computation of offset

Offset Points of Auto Points

Offset points

can be created with auto points when auto points are stored to the DB-X.

can be to the left or to the right of auto points.

are automatically computed with the logging of auto points, if configured.

form a chain relative to the chain of auto points to which they are related. Subsequently

computed chains are independent from each other.

can be coded independently of auto points.

have the same time of when they were stored as the auto points to which they are related.

have the same coding functionality, properties and averaging functionality as auto points.

Refer to "48.1 Overview".

Up to two offset points can be related to one auto point.

The screens for the configuration of offset points are identical except for the title Auto Points

- Offset 1 and Auto Points - Offset 2. For simplicity, the title Auto Points - Offset is used

in the following description.

The computation of offset points depends on the number of auto points in one chain.

One auto point

No offset points are computed or stored.

Two auto points

The configured offsets are applied perpendicular to the line between two auto points.