Measuring The Target Points - Leica FlexLine plus User Manual

7.2.2
Manual Angle Setting
Sight target point
Station Setup Result
FlexLine plus, Programs

Measuring the target points

Available for Method: Ori. with Angle only.
Enter the PtID and height of the target. Measure the Hz angle and repeat the meas-
urement in the ohter face by pressing
The station setup is complete.
The remaining screens are available for all methods except Ori. with Angle and Local
Resection.
In the Sight target point! screen:
2 / I: Indicates that the second point was measured in face I.
2 / I II: Indicates that the second point was measured in faces I and II.
Sight the target point and select Meas, or Dist and Store to measure to the target
point.
Description of symbols
Field Description

Standard deviation/value within the defined limit
x Standard deviation/value exceeds the defined limit
--- No value calculated
Description of fields
Field Description
If the standard deviation for position in East and North is calculated, a
Accur.
checkbox is displayed. The checkbox is checked if the calculated position
Posit.
is within the standard deviation limits or crossed if it is not.
Accur. If the standard deviation for Height is calculated, a checkbox is
displayed. The checkbox is checked if the calculated Height is within the
Height
standard deviation limits or crossed if it is not.
If the standard deviation for the Hz Orientation angle is calculated, a
Accur. Hz
checkbox is displayed. The checkbox is checked if the calculated Hz
Orientation is within the standard deviation limits or crossed if it is not.
Face. Press Set to set the new orientation.
F1 Measure more points
To return to the Enter Target Point
screen to measure more points.
F2 Measure in other face
To measure the same target point in
another face.
F3 Access Tolerances
To change the accuracy limit values.
F4 Compute
To calculate and display the station
coordinates.
62