Measuring The Target Points - Leica TS03 User Manual

Measure Station
Height
7.2.2
Manual Angle Setting
Apps
For the Local Resection method, Cont continues to the Meas. Pt1:
Origin (0/0/0) screen. The first point measured is the origin of the
coordinate system. The second point measured is, depending on the
setting, either the North or East direction of the coordinate system.
4. Enter Target Point: Enter the PtID of the target. Press Cont to
search for the point in the current job. Select the desired point or
enter new coordinates and continue to the Sight target point!
screen. Refer to "7.2.2 Measuring the Target Points", "Sight target
point".
Optional for TS07.
Key Description
OK The measured instrument height is displayed and used in the
setup app.
Dist To measure the instrument height.
Description of fields
Field Option
Intensity Scroll bar
Measured Display only
height
Height Off- Editable field
set
Instrument Display only
height

Measuring the Target Points

Available for Method: Ori. with Angle only.
Description
External influences and the surface condi-
tions may require the adjustment of the
intensity of the plummet.
Adjust the intensity of the plummet using
the navigation key.
The laser can be adjusted in 20% steps as
required.
The height measured by the laser plummet.
The entered value is added to the measured
vertical distance.
The sum of Measured height and Height
Offset.
75