BRAKE FLUID RESERVOIR
Removal and Installation
1. Open the reservoir cap and drain the oil.
2. Remove the brake fluid reservoir.
Notice
1.Do not apply excessive force when removing the
reservoir.
2.Incase of the reservoir equipped vehicle, pull out
the lock pin (2) and remove the reservoir.
3. Remove the grommet from master cylinder.
4. Install in the reverse order of removal.
Notice
• Use only specified brake fluid.
• Always bleed the air from the brake system after
replacing the brake fluid reservoir.
BRAKE SYSTEM
REXTON SM - 2004.4
* ESP equipped vehicle
8A-13
Y220_08A017
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN