Iscsi Priority-Bits; Show Interface Dcbx Detail - Dell C9000 Series Reference Manual

iscsi priority-bits

Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
C9000 Series
Syntax
iscsi priority-bits priority-bitmap
To remove the configured iSCSI priority, use the no iscsi priority-bits
command.
Parameters
priority-bitmap
Defaults 0x10
Command Modes PROTOCOL LLDP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information This command is available at the global level only.

show interface dcbx detail

Display the DCBX configuration on an interface.
C9000 Series
Syntax
show interface port-type slot/port dcbx detail
Enter the priority-bitmap range. The range is from 1 to FF.
Description
Inroduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Data Center Bridging (DCB) 713