Dell C9000 Series Reference Manual page 701

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

To specify a port range, you can enter a hyphenated range of one or more port range values
separated with commas; for example, show interfaces tengigabitethernet 10/0-1 ets
summary. To enter any random number of ports, you can enter a comma-separated string of port
numbers, for example show interfaces tengigabitethernet 10/2,4 ets summary
The following describes the show interface summary command shown in the following
example.
Field
Description
Interface
Interface type with stack-unit and port number.
Max Supported
Maximum number of priority groups supported.
TC Group
Number of Traffic
Number of 802.1p priorities currently configured.
Classes
Admin mode
ETS mode: on or off. When on, the scheduling and bandwidth allocation
configured in an ETS output policy or received in a DCBX TLV from a peer
can take effect on an interface.
Admin Parameters
ETS configuration on local port, including priority groups, assigned dot1p
priorities, and bandwidth allocation.
Remote
ETS configuration on remote peer port, including admin mode (enabled if a
Parameters
valid TLV was received or disabled), priority groups, assigned dot1p
priorities, and bandwidth allocation. If ETS admin mode is enabled on the
remote port for DCBX exchange, the Willing bit received in ETS TLVs from
the remote peer is included.
Local Parameters
ETS configuration on local port, including admin mode (enabled when a
valid TLV is received from a peer), priority groups, assigned dot1p priorities,
and bandwidth allocation.
Operational status
Port state for current operational ETS configuration:
(local port)
ETS DCBX Oper
Operational status of the ETS configuration on the local port: match or
status
mismatch.
State Machine
Type of state machine used for DCBX exchanges of ETS parameters:
Type
Feature — for legacy DCBX versions; Asymmetric — for an IEEE version.
Conf TLV Tx
Status of ETS Configuration TLV advertisements: enabled or disabled.
Status
ETS TLV Statistic:
Number of ETS Configuration TLVs received.
Input Conf TLV
pkts
Init: Local ETS configuration parameters were exchanged with the
peer.
Recommend: Remote ETS configuration parameters were received
from the peer.
Internally propagated: ETS configuration parameters were
received from the configuration source.
Data Center Bridging (DCB)
701

Advertisement

Table of Contents
loading

Table of Contents