capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
C9000 Series
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000
Defaults
40960000 bytes
Command Modes
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.5.1.0
Related
Commands
capture bgp-pdu neighbor (ipv6)
Enable capture of an IPv6 BGP neighbor packet.
C9000 Series
Syntax
capture bgp-pdu neighbor ipv6-address direction {both | rx | tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv6-address command.
Parameters
ipv6-address
Enter a size for the capture buffer.
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
•
show capture bgp-pdu neighbor
•
capture bgp-pdu neighbor
Enter the IPv6 address of the target BGP neighbor.
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
Border Gateway Protocol
579