Show Cam-Acl-Pe - Dell C9000 Series Reference Manual

show cam-acl-pe

Display details of global ingress CAM ACL profiles for the port extender.
C9000 Series
Syntax
show cam-acl-pe
Defaults None
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information The display reflects the settings implemented with the cam-acl-pecommand.
This command only displays the details of CAM ACL profiles configured globally on the
PE. It does not display CAM ACL profiles for each PE.
Example
Dell# show cam-acl-pe
-- Port extender Cam ACL --
L2Acl
Ipv4Acl
Ipv6Acl
Ipv4Qos
L2Qos
IpMacAcl
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Current Settings(in block sizes)
1 block = 256 entries
:
:
:
:
:
:
6
4
0
2
1
0
Content Addressable Memory (CAM) 655