Show Interface Pfc - Dell C9000 Series Reference Manual

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

show interface pfc

Display the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.
C9000 Series
Syntax
show interface port-type slot/port pfc {summary | detail}
Parameters
port-type slot/
port pfc
{summary | detail}
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.2.(0.0)
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information To clear the PFC TLV counters, use the clear pfc counters interface port-
type slot/port command.
To view the PFC show output for multiple ports of a specified slot, you can specify any
random port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port range
values separated with commas; for example, show interfaces
tengigabitethernet 10/0-1 pfc summary. To enter any random number of
ports, you can enter a comma-separated string of port numbers, for example show
interfaces tengigabitethernet 10/2,4 pfc summary
The following describes the show interface pfc summary command shown in the
following example.
Enter the port-type slot and port PFC information.
Enter the keyword summary for a summary list of results or
enter the keyword detail for a full list of results.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON..
Down status messages added.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Data Center Bridging (DCB)
691

Advertisement

Table of Contents
loading

Table of Contents