Pfc Priority - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
Related show hardware pfc-nodrop-priority
Commands to the priority.

pfc priority

Configure the CoS traffic to be stopped for the specified delay.
C9000 Series
Syntax
pfc priority priority-range
To delete the pfc priority configuration, use the no pfc priority command.
Parameters
priority-range
Defaults none
Command Modes DCB INPUT POLICY
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.16.0
Description
Introduced on the C9010, S6000, S6000–ON, Z9100–ON and
S6100–ON.
— displays the packets drop count corresponding
Enter the 802.1p values of the frames to be paused. Separate the
priority values with a comma; specify a priority range with a
dash; for example, pfc priority 1,3,5-7. The range is from 0 to 7.
Description
Introduced on the C9010.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Data Center Bridging (DCB) 688