Clear Pfc Counters - Dell C9000 Series Reference Manual

show hardware pfc-nodrop-priority
to the priority.

clear pfc counters

Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
C9000 Series
Syntax
clear pfc counters [port-type slot/port | stack-unit {unit number
| all } all stack-ports all}] | interface {statistics}]
Parameters
port-type
stack-unit unit
number
all stack-ports all
statistics
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.1)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information If you do not use the statistics parameter, both hardware and DCBx counters clear.
— displays the packets drop count corresponding
Enter the keywords port-type then the slot/port information.
Enter the keywords stack-unit then the stack-unit number to
be cleared.
Enter the keywords all stack-ports all to clear the
counters on all interfaces.
Enter the keyboard statistics to clear the hardware PFC
counters.
Description
Introduced on the C9010.
Introduced on the S3048-ON.
Introduced on the S4048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Data Center Bridging (DCB) 682