Clear Ip Bgp Ipv6-Address - Dell C9000 Series Reference Manual

direction {both |
rx | tx}
Defaults Not configured.
Command Modes
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.5.1.0
Related
Commands

clear ip bgp ipv6-address

Reset BGP sessions specific to an IPv6 address. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
C9000 Series
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics |
soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
Parameters
ipv6-address
flap-statistics
ipv4
ipv6
Enter the keyword direction and a direction— either rx for
inbound, tx for outbound, or both.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
• clear ip bgp – enables route reflection between route reflector and clients.
• show capture bgp-pdu neighbor
• capture bgp-pdu neighbor
Enter an IPv6 address to reset neighbors belonging to that IP.
Used without a qualifier, the keyword resets all neighbors
belonging to that IP.
(OPTIONAL) Enter the keywords flap-statistics to clear all
flap statistics belonging to that AS or a specified address family
within that IP.
(OPTIONAL) Enter the keyword ipv4 to select options for that
address family.
(OPTIONAL) Enter the keyword ipv6 to select options for that
address family.
– configures a route reflector and clients.
– enables capture of an IPv4 BGP neighbor packet.
Border Gateway Protocol 580