Ipv6 Prefix-List - Dell C9000 Series Reference Manual

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information
The higher the administrative distance assigned to a route means that your confidence
in that route is low. Routes assigned an administrative distance of 255 are not installed
in the routing table.
Routes from confederations are treated as internal BGP routes.

ipv6 prefix-list

Configure an IPv6 prefix list.
C9000 Series
Syntax
ipv6 prefix-list prefix-list name
Parameters
prefix-list name
Defaults
none
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
CAUTION:
Dell Networking recommends that you do not change the
administrative distance of internal routes. Changing the administrative
distances may cause routing table inconsistencies.
Enter the name of the prefix list.
NOTE:
names.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
There is a 140-character limit for prefix list
Border Gateway Protocol
595

Advertisement

Table of Contents
loading

Table of Contents