control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
C9000 Series
Syntax
control-plane-cpuqos
Defaults
Not configured.
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
service-policy rate-limit-cpu-queues
Apply a QoS input policy-map that rate-limits traffic on control-plane queues.
C9000 Series
Syntax
service-policy rate-limit-cpu-queues policy-name
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Control Plane Policing (CoPP)
664