Dell C9000 Series Reference Manual page 692

Field Description
Interface Interface type with stack-unit and port number.
Admin mode is on PFC admin mode is on or off with a list of the configured PFC
Admin is enabled priorities. When the PFC admin mode is on, PFC advertisements
are enabled to be sent and received from peers; received PFC
configuration take effect. The admin operational status for a
DCBX exchange of PFC configuration is enabled or disabled.
Remote is Operational status (enabled or disabled) of peer device for DCBX
enabled, Priority exchange of PFC configuration with a list of the configured PFC
list Remote priorities. Willing status of peer device for DCBX exchange
Willing Status is (Willing bit received in PFC TLV): enabled or disable.
enabled
Local is enabled DCBX operational status (enabled or disabled) with a list of the
configured PFC priorities.
Operational status Port state for current operational PFC configuration:
(local port)
•
•
•
PFC DCBX Oper Operational status for the exchange of the PFC configuration on
status the local port: match (up) or mismatch (down).
State Machine Type of state machine used for DCBX exchanges of the PFC
Type parameters: Feature — for legacy DCBX versions; Symmetric —
for an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Status of FCoE advertisements in application priority TLVs from
Priority TLV: FCOE the local DCBX port: enabled or disabled.
TLV Tx Status
Application Status of ISCSI advertisements in application priority TLVs from
Priority TLV: SCSI the local DCBX port: enabled or disabled.
TLV Tx Status
Application Priority bitmap the local DCBX port uses in FCoE advertisements
Priority TLV: Local in application priority TLVs.
FCOE Priority Map
Application Priority bitmap the local DCBX port uses in ISCSI advertisements
Priority TLV: Local in application priority TLVs.
ISCSI Priority Map
Application Status of FCoE advertisements in application priority TLVs from
Priority TLV: the remote peer port: enabled or disabled.
Init: Local PFC configuration parameters were
exchanged with the peer.
Recommend: Remote PFC configuration parameters were
received from the peer.
Internally propagated: PFC configuration parameters
were received from the configuration source.
Data Center Bridging (DCB) 692