Show Ip Bgp Ipv6 Unicast Cluster-List - Dell C9000 Series Reference Manual

Parameters
network
network-mask
longer-prefixes
Command Modes
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp
command output for a BGP route does not list the INACTIVE reason.

show ip bgp ipv6 unicast cluster-list

View BGP neighbors in a specific cluster.
C9000 Series
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Parameters
cluster-id
Command Modes
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
(OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
(OPTIONAL) Enter the network mask (in slash prefix format) of
the BGP network address.
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
(OPTIONAL) Enter the cluster id in dotted decimal format.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Border Gateway Protocol 631