Cam-Acl-Egress-Pe - Dell C9000 Series Reference Manual

Version
8.3.11.1
8.3.7.0

cam-acl-egress-pe

Allocate CAM for egress ACLs on the port extender.
C9000 Series
Syntax
cam-acl-egress-pe {12acl number ipv4acl number ipv6acl number}
Parameters
l2acl
ipv4acl
ipv6acl
Defaults None
Command Modes CONFIG
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information Enter the CAM profile name and specify the amount of CAM space. The total space
allocated must be equal to 13. The range for ipv4acl is from 1 to 4. The ipv6acl
range must be a factor of 2.
Related show cam-acl-egress-pe
Commands
Description
Introduced on the Z9000.
Introduced on the S4810.
Allocates space for the L2 ACL. The default value is 5
Allocates space for the L3 ACL. The default value is 2.
Allocates space for the IPv6 L3 ACL. The default value is 2
Description
Introduced on the C9010.
Content Addressable Memory (CAM) 648