Redistribute Ospf - Dell C9000 Series Reference Manual

Parameters
connected
static
route-map map-
name
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
7.4.1.0
Usage Information If you do not configure the default-metric command in addition to the
redistribute command, or there is no route map to set the metric, the metric for
redistributed static and connected is "0".
To redistribute the default route (0::0/0), configure the neighbor default-
originate command.
Related neighbor default-originate
Commands

redistribute ospf

Redistribute OSPFv3 routes into BGP.
C9000 Series
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match
internal]] [route-map map-name]
Enter the keyword connected to redistribute routes from
physically connected interfaces.
Enter the keyword static to redistribute manually configured
routes. These routes are treated as incomplete routes.
(OPTIONAL) Enter the keywords route-map followed by the
name of an established route map. Only the following ROUTE-
MAP mode commands are supported:
• match ipv6 address
• match ipv6 next-hop
• match ipv6 route-source
• set ipv6 next-hop
If the route map is not configured, the default is deny (to drop
all routes).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced
– injects the default route.
Border Gateway Protocol 622