show ipv6 prefix-list
Displays the specified IPv6 prefix list.
C9000 Series
Syntax
show ipv6 prefix-list detail {prefix-list name} | summary
Parameters
detail
prefix-list name
summary
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
8.3.10.0
Related
ipv6 prefix-list
Commands
show ip bgp ipv6 unicast
View the current BGP routing table.
C9000 Series
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Display a detailed description of the selected IPv6 prefix list.
Enter the name of the prefix list.
NOTE:
There is a 140-character limit for prefix list
names.
Display a summary of RPF routes.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4810.
— configures an IPv6 prefix-list.
Border Gateway Protocol
630