Clear Control-Traffic Queue - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

stack-unit unit

portset port-pipe

Clear per-protocol rate-limiting counters for all control-plane and port-set (port-pipe)

Command Modes

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information To display the per-protocol counters of rate-limited control-plane traffic at the

aggregated (switch) or line card and port set level, use the show control-traffic

protocol command.

clear control-traffic queue

Clear per-queue counters of rate-limited control-plane traffic.

C9000 Series

clear contol—traffic queue {all | queue-number} counters

Enter the keyword cp-switch to clear counters for rate-limited

traffic on the central switch (aggregated CoPP).

Enter the keyword all to clear counters for all protocol rate-

limiting traffic information.

Enter the keyword pe and the port extender ID. The PE ID range

is from 0 to 255.

Enter the keyword stack-unit and the stack unit number. The

stack-unit range is from 0 to 7.

Enter the keyword portset and the port-pipe ID. The port-pipe

ID value is 0.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Control Plane Policing (CoPP)

Table of Contents