ipv6
unicast
multicast
soft
in
out
Command Modes
EXEC Privilege
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
clear ip bgp ipv6 dampening
Clear information on route dampening and return suppressed route to active state.
C9000 Series
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
Parameters
ipv6-address
Command Modes
EXEC Privilege
Command History
Version
9.9(0.0)
(OPTIONAL) Enter the keyword ipv6 to select options for that
address family.
(OPTIONAL) Enter the keyword unicast to select the unicast
option within the selected address family.
(OPTIONAL) Enter the keyword multicast to select the
multicast option within the selected address family. Multicast is
supported on IPv4 only.
(OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
(OPTIONAL) Enter the keyword in to activate only inbound
policies.
(OPTIONAL) Enter the keyword out to activate only outbound
policies.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE:
The :: notation specifies successive hexadecimal
fields of zeros.
Description
Introduced on the C9010.
Border Gateway Protocol
583