Neighbor Weight - Dell C9000 Series Reference Manual

Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information Loopback interfaces are up constantly and the BGP session may need one interface
constantly up to stabilize the session. The neighbor update-source command is
not necessary for directly connected internal BGP sessions.

neighbor weight

Assign a weight to the neighbor connection, which is used to determine the best path.
C9000 Series
Syntax
neighbor {ipv6-address | peer-group-name} weight weight
To remove a weight value, use the no neighbor {ipv6-address | peer-group-
name} weight weight command.
Parameters
ipv6-address
peer-group-name
weight
Defaults 0
Command Modes ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to disable all routers within
the peer group.
Enter a number as the weight. The range is 0 to 65535. The
default is 0.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol 618