Dell C9000 Series Reference Manual page 667

Parameters
cp-switch
linecard slot-id
portset port-pipe
pe pe-id
stack-unit unit
number
portset port-pipe
counters
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
Usage Information In the show control-traffic protocol output, RxBytes displays the number of
bytes of control-plane traffic received on which protocol-based rate limiting is applied.
TxBytes displays the number of bytes transmitted to a control-plane CPU after
protocol-based rate limiting is applied. Drops display the number of bytes of control-
plane traffic that have been dropped as a result of protocol-based rate limiting.
The number of RxBytes is calculated as: Drops/<packet-size> + TxBytes/<packet-size +
4 bytes> = RxBytes (total packets received)
To clear the per-protocol counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the clear control-traffic
protocol command.
Example (PE)
Dell#show control-traffic protocol pe 3 stack-unit 0 portset 0 counters
Protocol
-------
STP/ARP/ICMP(v4/v6)/IGMP/MLD/NTP/FTP/TELNET/SSH
PE CSP/PE-CB LLDP
LLDP/LACP/8021x
Example
Dell#show control-traffic protocol linecard 2 portset 0 counters
Protocol
Enter the keyword cp-switch to display counters for rate-
limited traffic on the central switch (aggregated CoPP).
Enter the slot ID and port pipe to display counters for rate-
limited traffic on a specified line card and port set. The slot ID
range is from 0 to 11. The port-pipe ID value is 0.
Enter the keyword pe and the port extender ID. Range is from 0
to 255.
Enter the keyword stack-unit and the stack unit number.
Range is from 0 to 7.
Enter the keyword portset and the port-pipe ID. Port pipe ID
value is 0.
Enter the keyword counters to display the traffic counters.
Description
Introduced on the C9010.
Introduced on the Z9500.
RxBytes
RxBytes TxBytes
------- -------
0 0
131227 131227
0 0
TxBytes Drops
Control Plane Policing (CoPP)
Drops
------
0
0
0
667