Neighbor Distribute-List - Dell C9000 Series Reference Manual

neighbor distribute-list

Distribute BGP information via an established prefix list.
C9000 Series
Syntax
neighbor {ipv6-address | peer-group-name} distribute-list prefix-
list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ipv6-address |
peer-group-name} distribute-list prefix-list-name {in | out}
command.
Parameters
ipv6-address
peer-group-name
prefix-list-name
in
out
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information Other BGP filtering commands include the neighbor filter-list and neighbor
route-map commands.
Related
Commands
Enter the IPv6 address in the x:x:x:x::x format.
Enter the name of the peer group.
Enter the name of an established prefix list. If you do not
configure the prefix list, the default is permit (to allow all
routes).
Enter the keyword in to distribute only inbound traffic.
Enter the keyword out to distribute only outbound traffic.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
• neighbor filter-list – assigns a AS-PATH list to a neighbor or peer group.
• neighbor route-map
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
– assigns a route map to a neighbor or peer group.
Border Gateway Protocol 601