Clear Ip Bgp * (Asterisk) - Dell C9000 Series Reference Manual

unicast
multicast
soft
in
out
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0

clear ip bgp * (asterisk)

Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
C9000 Series
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast soft
[in | out] | soft [in | out]]
Parameters
*
ipv4 multicast soft
[in | out]
ipv6 unicast soft
[in | out]
(OPTIONAL) Enter the keyword unicast to select the unicast
option within the selected address family.
(OPTIONAL) Enter the keyword multicast to select the
multicast option within the selected address family. Multicast is
supported on IPv4 only
(OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address
soft, both inbound and outbound policies are reset.
(OPTIONAL) Enter the keyword in to activate only inbound
policies.
(OPTIONAL) Enter the keyword out to activate only outbound
policies.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter an asterisk ( * ) to reset all BGP sessions.
(OPTIONAL) This keyword sequence sets options within the a
specified IPv4 address family.
(OPTIONAL) This keyword sequence sets options within the a
specified IPv6 address family.
Border Gateway Protocol 581