Dell C9000 Series Reference Manual page 715

Field Description
Configuration Specifies whether the port serves as the DCBX configuration source on the
Source switch: true (yes) or false (no).
Local DCBX DCBX version accepted in a DCB configuration as compatible. In auto-
Compatibility upstream mode, a port can only receive a DCBX version supported on the
mode remote peer.
Local DCBX DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto (port
Configured mode auto-configures to use the DCBX version received from a peer).
Peer Operating DCBX version that the peer uses to exchange DCB parameters.
version
Local DCBX TLVs Transmission status (enabled or disabled) of advertised DCB TLVs (see TLV
Transmitted code at the top of the show command output).
Local DCBX DCBX version advertised in Control TLVs.
Status: DCBX
Operational
Version
Local DCBX Highest DCBX version supported in Control TLVs.
Status: DCBX Max
Version Supported
Local DCBX Sequence number transmitted in Control TLVs.
Status: Sequence
Number
Local DCBX Acknowledgement number transmitted in Control TLVs.
Status:
Acknowledgment
Number
Local DCBX Current operational state of the DCBX protocol: ACK or IN-SYNC.
Status: Protocol
State
Peer DCBX Status: DCBX version advertised in Control TLVs received from the peer device.
DCBX Operational
Version
Peer DCBX Status: Highest DCBX version supported in Control TLVs received from the peer
DCBX Max device.
Version Supported
Peer DCBX Status: Sequence number transmitted in Control TLVs received from the peer
Sequence device.
Number
Peer DCBX Status: Acknowledgement number transmitted in Control TLVs received from the
Acknowledgment peer device.
Number
Data Center Bridging (DCB) 715