Debug Ip Bgp Keepalives - Dell C9000 Series Reference Manual

Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.2(1.0)
7.4.1.0

debug ip bgp keepalives

Allows you to view information about BGP keepalive messages.
C9000 Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ipv6-address
peer-group peer-
group-name
• . (period) matches on any single character, including white
space.
• * (asterisk) matches on sequences in a pattern (zero or
more sequences).
• + (plus sign) matches on sequences in a pattern (one or
more sequences).
• ? (question mark) matches sequences in a pattern (0 or 1
sequences).
• [ ] (brackets) matches a range of single-character
patterns.
• ^ (caret) matches the beginning of the input string. If you
use the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
• $ (dollar sign) matches the end of the output string.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(OPTIONAL) Enter the keywords peer-group followed by the
name of the peer group.
Border Gateway Protocol 587