Network Backdoor; Redistribute - Dell C9000 Series Reference Manual

network backdoor

Specify this IGP route as the preferred route.
C9000 Series
Syntax
network ipv6-address prefix-length backdoor
To remove a network, use the no network ipv6-address prefix-length
backdoor command.
Parameters
ipv6-address
prefix-length
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information Though the software does not generate a route due to backdoor config, there is an
option for injecting/ sourcing a local route in presence of network backdoor config on
a learned route.

redistribute

Redistribute routes into BGP.
C9000 Series
Syntax
redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution [connected | static]
[route-map map-name] command.
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The r range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol 621