Dell C9000 Series Reference Manual page 660

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
Usage Information This command takes effect only after reboot.
On the C9010, OpenFlow supports only the scaled-l3-hosts hardware forwarding-table
mode (UFT mode 3), providing a unified forwarding table (UFT) of:
•
•
•
OpenFlow does not support the scaled-l3-routes forwarding-table mode (UFT mode 4)
on the C9010.
Related show hardware forwarding-table mode
Commands in the current boot and in the next boot.
Description
Introduced on the C9010.
Introduced on the S6000, S6000-ON, and Z9500 switch..
L2 MAC entries: 160K
L3 host entries: 144K
L3 route entries: 16K
— displays the hardware forwarding table mode
Content Addressable Memory (CAM) 660