12.7
Monitor Data
The setting items of the monitor data are explained in this section.
System monitor data
Unless noted in particular, the monitor value is saved as binary data.
Item
Start history (Up to 64 records can be stored)
[Md.19] Number of write accesses to flash ROM
[Md.50] Forced stop input
[Md.51] Amplifier-less operation mode status
[Md.52] Communication between amplifiers axes searching flag
[Md.53] SSCNET control status
[Md.59] Module information
[Md.130] F/W version
[Md.131] Digital oscilloscope running flag
[Md.132] Operation cycle setting
[Md.133] Operation cycle over flag
[Md.134] Operation time
[Md.135] Maximum operation time
12 DATA USED FOR POSITIONING CONTROL
468
12.7 Monitor Data
[Md.3] Start information
[Md.4] Start No.
[Md.54] Start (Year: month)
[Md.5] Start (Day: hour)
[Md.6] Start (Minute: second)
[Md.60] Start (ms)
[Md.7] Error judgment
[Md.8] Start history pointer
Default value
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0
0
0
0
0
RD77MS2: 4000H
RD77MS4: 4001H
RD77MS8: 4002H
RD77MS16: 4003H
Factory-set product information
0
0
0
0
0
Need help?
Do you have a question about the RD77MS2 and is the answer not in the manual?