Appendix; App. 1 Optional Data Monitor Function - Mitsubishi Electric MELSERVO MR-J4-B-LL Series Instruction Manual

APPENDIX

APPENDIX

App. 1 Optional data monitor function

The optional data monitor function is used to monitor data in the servo amplifier with the servo system
controller. In the optional data monitor function, data types of registered monitor and transient command can
be set.
For details of usage and others, refer to the manuals for servo system controllers.
App. 1.1 Registered monitor
The following explains data types exclusively for the MR-J4-(DU)_B_-LL. Items not mentioned are the same
as those for MR-J4-_B_ servo amplifier. Refer to app. 13.1 of "MR-J4-_B_(-RJ) Servo Amplifier Instruction
Manual".
Pressure command
Load cell pressure
Monitor input signal ch1
Monitor input signal ch2
App. 1.2 Transient command
Transient commands are the same as those for MR-J4-_B_ servo amplifiers. Refer to app. 13.2 of "MR-J4-
_B_(-RJ) Servo Amplifier Instruction Manual".
Data type
The pressure command from the controller is displayed.
A pressure feedback value of the load cell for pressure control is displayed.
A value of the analog monitor input 1 is displayed.
A value of the analog monitor input 2 is displayed.
App. - 1
Description