Mitsubishi Electric RD77MS2 User Manual page 547

Buffer memory area configuration
Synchronous control area
*1 Use of skipped address Nos. is prohibited. If used, the system may not operate correctly.
When the parameter of the servo amplifier side is changed by the following method, the Simple Motion
module reads parameters automatically, and the data is transmitted to the servo parameter area in the buffer
memory and internal memory (nonvolatile).
• When changing the servo parameters by the auto tuning.
• When the servo parameter is changing after the MR Configurator2 is connected directly with the servo
amplifier.
Servo input axis parameter
Servo input axis monitor data
Synchronous encoder axis parameter
Synchronous encoder axis control data
Synchronous encoder axis monitor data
Synchronous control system control data
Synchronous parameter
Synchronous control monitor data
Control data for synchronous control
Cam operation control data
Cam operation monitor data
Buffer memory address
32800+10n to 32805+10n
33120+10n to 33127+10n
34720+20j to 34735+20j
35040+10j to 35047+10j
35200+20j to 35212+20j
36320, 36322
36400+200n to 36513+200n
42800+40n to 42835+40n
44080+20n to 44090+20n
45000 to 53791
53800 to 53801
12 DATA USED FOR POSITIONING CONTROL
12.9 Memory Configuration and Data Process
Writing
possibility
Possible
Not possible
Possible
Possible
Not possible
Possible
Possible
Not possible
Possible
Possible
12
Not possible
545