Router Commands - Alcatel-Lucent 7210 SAS T Configuration Manual

IP Router Command Reference

Router Commands

config
Router BFD commands (Supported only on 7210 SAS-R6, 7210 SAS-R12 and
7210 SAS-T network mode devices)
config
Page 58
Guide
— router [router-name]
— aggregate
— no aggregate
— autonomous-system
— no autonomous-system
— ecmp
— no ecmp
— router-id
— no router-id
— [no]
ence] [metric metric] [tag tag] [enable|disable] next-hop gateway [bfd-enable]
[{cpe-check cpe-ip-address [interval seconds] [drop-count count] [log]}]
— [no]
ence] [metric metric] [tag tag] [enable|disable] indirect ip-address [{cpe-check
cpe-ip-address [interval seconds] [drop-count count] [log]}]
— [no]
ence] [metric metric] [enable|disable] black-hole
— [no]static-route
ence][metric metric] [enable | disable] indirect ip-address {prefix-list prefixlist-
name [all | none]}
— [no]
ence][metric metric] [tag tag] [enable | disable] next-hop ip-int-name | ip-
address{prefix-list prefix-list-name [all | none]}
— [no]
ence][metric metric] [tag tag] [enable | disable] black-hole {prefix-list prefix-list-
name [all | none]}
— [no]
— router
— bfd
— abort
— begin
— bfd-template
— no bfd-template
7210 SAS M, T, X, R6, R12, Mxp OS Router Configuration
ip-prefix/ip-prefix-length [summary-only]
ip-prefix/ip-prefix-length
autonomous-system
max-ecmp-routes
ip-address
static-route {ip-prefix/prefix-length|ip-prefix netmask} [preference prefer-
static-route {ip-prefix/prefix-length|ip-prefix netmask} [preference prefer-
static-route {ip-prefix/prefix-length|ip-prefix netmask} [preference prefer-
{ip-prefix/prefix-length | ip-prefix netmask} [preference prefer-
static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference prefer-
static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference prefer-
triggered-policy
[32 chars max]
— echo-receive milliseconds
— no echo-receive
— multiplier [3...20]
— no multiplier
— receive-interval milliseconds
— no receive-interval
— transmit-interval milliseconds
— no transmit-interval