Licensing Measurement Application Software - After Initial Purchase; Install License By Using A Usb Storage Device - Keysight M9290A Getting Started And Troubleshooting Manual

Software Installation and Licensing

Licensing Measurement Application Software - After Initial Purchase

Licensing Measurement Application Software - After Initial Purchase

Additional measurement application software can be ordered after your initial
purchase of the signal analyzer. Software upgrades are provided in a kit that includes
an option based Entitlement Certificate and a license agreement. The licenses are
downloaded from the license Web site onto a USB storage device so they can be
loaded into the instrument.
For all software upgrades, we recommend that the latest version of the instrument
software be installed. This ensures that the measurement application being licensed
and activated is installed and is the most current version.
The latest revision of the software may be downloaded from:
http://www.keysight.com/find/cxa-m_software
No calibration is required after a measurement application installation.
NOTE

Install License by Using a USB Storage Device

Please refer to the procedures below to install a measurement application license
with a USB storage device on the controller:
Step Action
1.Redeem the Follow the instructions on the
Option Upgrade Certificate
Entitlement
Certificate
2. Save the license Save the .lic file to the root directory
file of a USB storage device
3. Load the license Connect the USB storage device to the
file USB ports of controller/computer.
Make sure Keysight License Manager
is running on your
controller/computer.
Alternatively the license file can be manually installed over USB or LAN by placing the license file in
NOTE
the following folder on the controller/computer.
C:\Program Files\Keysight\licensing
30
Notes
After redeeming your Option Upgrade
Entitlement Certificate you will receive an e-mail
with an attached License File.
The signal analyzer will automatically load the
license file. (This may take a few minutes) Upon
completion, the Keysight License Manager will
display a "Successful License Installation"
message.