Timeout Login Response - Dell S6100 Configuration Manual

timeout login response

Specify how long the software waits for the login input (for example, the user name and password) before timing out.
Syntax timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Defaults See Parameters.
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information The software measures the period of inactivity defined in this command as the period between consecutive
keystrokes. For example, if your password is "password" you can enter "p" and wait 29 seconds to enter the next
letter.
1404 Security
Enter a number of seconds the software waits before logging you out. The range is:
• VTY — range is from 1 to 30 seconds, the default is 30 seconds.
• Console — range is from 1 to 300 seconds, the default is 0 seconds (no timeout).
• AUX — range is from 1 to 300 seconds, the default is 0 seconds (no timeout).
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.