Show Ip Igmp Snooping Interface - Dell PowerConnect 8024 Cli Reference Manual

Syntax
show ip igmp snooping groups [vlan
vlan_id — Specifies a VLAN ID value.
•
ip-multicast-address — Specifies an IP Multicast address.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
To see the full Multicast address table (including static addresses) use the show bridge address-
table command.
Example
The example shows Multicast groups learned by IGMP snooping for all VLANs.
console>show ip igmp snooping groups
Vlan IP Address
---- -----------
1 224-239.130|2.2.3
19 224-239.130|2.2.8
IGMP Reporters that are forbidden statically:
---------------------------------------------
Vlan IP Address
---- ------------------
1 224-239.130|2.2.3

show ip igmp snooping interface

Use the show ip igmp snooping interface command in Privileged EXEC mode to display the
IGMP snooping configuration.
vlan-id ip-multicast-address
] [address
Ports
-------
1/g1, 2/g2
1/g9-g11
Ports
-------------------
1/g19
IGMP Snooping Commands
]
281