Create Thin Provisioning Pool - Fujitsu ETERNUS DX100 S3 Setup Manual

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
2
Select "Enable" for the Thin Provisioning function and then click the [Set] button.
 A confirmation screen appears.
3
Click the [OK] button.
 The Thin Provisioning setting starts.
4
Click the [Done] button to return to the [Setting] screen.
4.4.2

Create Thin Provisioning Pool

This function creates a Thin Provisioning Pool.
The maximum number of pools and maximum pool capacity for each model
ETERNUS DX100 S3
ETERNUS DX200 S3
ETERNUS DX500 S3
ETERNUS DX600 S3
ETERNUS DX200F
*1: Up to 256 pools can be created. When the maximum installation number of drives of a model is 512 or less, the
maximum number of pools is half the maximum installation number of drives. The maximum pool number is the
maximum total number of TPPs and Flexible Tier Sub Pools (FTSPs) that can be created in the ETERNUS DX.
*2: The maximum pool capacity is specified when "Enable" is selected for the Thin Provisioning function. Refer to
Set Thin Provisioning" (page 55)
Flexible Tier Pools (FTRPs) that can be created in the ETERNUS DX.
There are two methods to create a TPP; automatic drive selection and manual drive selection.
Model Maximum number of pools (*1)
for details. The maximum pool capacity is the maximum total capacity for TPPs and
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
72
132
256
256
12
56
End of procedure
Maximum pool capacity (TB) (*2)
32, 64, 128, 256
32, 64, 128, 256
64, 128, 256, 384
128, 256, 512, 768
32
P2X0-1250-06ENZ0
"4.4.1