Tools And Test Equipment; Self-Diagnostic Functions; Tests; Indicating Revision Numbers - Fujitsu MAB3091FC Series Maintenance Manual

At shipment
Revising at field
2.1.5

Tools and test equipment

Disk drive troubleshooting and repair in the field require only standard hand tools. No special
tools or test equipment are required.
This manual does not describe the factory-level tools and test equipment.
2.1.6

Self-diagnostic functions

IDD has the following self-diagnostic functions for checking basic operation of a single IDD:
•
Initial self-diagnosis
•
Offline self-diagnosis (using Send Diagnostic command)
For details of these self-diagnostic functions, refer to the OEM Manual – Specifications &
Installation –.
2.1.7

Tests

This disk drive can be tested in the following ways:
•
Initial seek operation check (See Subsection 2.2.1)
•
Operation test (See Subsection 2.2.2)
•
Diagnostic test (See Subsection 2.2.3)
Figure 2.3 shows the flow of these tests.
2 - 6
Figure 2.2

Indicating revision numbers

C141-F028-01EN
Rev. A2
Rev. A3