Show Vman - Extreme Networks ExtremeWare XOS Command Reference Manual

show vman

show vman {<vlan_name> | etherType | detail}
Description
Displays information about VMANs.
Syntax Description
vlan_name
etherType
detail
Default
Summary information for all VMANs on the device.
Usage Guidelines
None.
Example
The following is an example of the display from the
-------------------------------------------------------------------------------
Name
-------------------------------------------------------------------------------
peggy
-------------------------------------------------------------------------------
Flags : (E) ESRP Slave, (f) IP Forwarding Enabled, (i) ISIS Enabled,
(I) IP Forwarding lpm-routing Enabled, (L) Loopback Enabled,
(m) IPmc Forwarding Enabled, (M) ESRP Master,
(n) IP Multinetting Enabled, (o) OSPF Enabled, (p) PIM Enabled,
(r) RIP Enabled, (T) Member of STP Domain, (v) VRRP Enabled
Total number of Vlan(s) : 3
The following is an example of the display from the
VLAN Interface with name my_vman_tunnel created by user
Tagging:
Priority:
Virtual router: VR-Default
Primary IP:
STPD:
Protocol:
Loopback:
Rate Shape:
QosProfile:
Ports:
ExtremeWare XOS 11.0 Command Reference Guide
Specifies information is displayed for particular VMAN.
Specifies that Ethertype information is displayed for each VMAN.
Specifies all information is displayed for each VMAN.
VID Protocol Addr
4092 --------------------
802.1Q Tag 4094
802.1P Priority 0
10.0.0.1/8
None
Match all unfiltered protocols
Disable
Disable
QP1
2. (Number of active ports=2)
command:
show vman
Flags Proto Ports
Active router
/Total
------------- ANY 0 /0
show vman <vlan_name>
show vman
Virtual
VR-Default
command:
259