Disable Iparp Refresh - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

IP Unicast Commands

disable iparp refresh

disable iparp {vr <vr_name>} refresh
Description
Disables IP ARP to refresh its IP ARP entries before timing out.
Syntax Description
vr_name
Specifies a virtual router.
Default
Enabled.
Usage Guidelines
The purpose of disabling ARP refresh is to reduce ARP traffic in a high node count layer 2 switching
only environment.
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command disables IP ARP refresh:
disable iparp refresh
History
This command was first available in ExtremeWare XOS 10.1.
The
option was added in ExtremeWare XOS 11.0.
vr
Platform Availability
This command is available on all platforms.
1110
ExtremeWare XOS 11.3 Command Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.3

Table of Contents