Configure Iproute Priority - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

configure iproute priority

configure iproute {ipv4} priority [rip | blackhole | bootp | ebgp | ibgp |
icmp | static | ospf-intra | ospf-inter | ospf-as-external | ospf-extern1 |
ospf-extern2] <priority>
Description
Changes the priority for all routes from a particular route origin.
Syntax Description
rip
bootp
ebgp
ibgp
icmp
blackhole
static
ospf-intra
ospf-inter
ospf-as-external
ospf-extern1
ospf-extern2
priority
Default
Table 23 lists the relative priorities assigned to routes depending upon the learned source of the route.
Table 23: Relative route priorities
Route Origin
Direct
Blackhole
Static
ICMP
EBGP
IBGP
OSPFIntra
OSPFInter
RIP
OSPFAsExt
OSPF External 1
OSPF External 2
1092
Specifies RIP.
Specifies BOOTP.
Specifies E-BGP routes
Specifies I-BGP routes
Specifies ICMP.
Specifies the blackhole route.
Specifies static routes.
Specifies OSPFIntra routing.
Specifies OSPFInter routing.
Specifies OSPF as External routing.
Specifies OSPF External 1 routing.
Specifies OSPF External 2 routing.
Specifies a priority number in the range of 11 to 65534.
Priority
10
50
1100
1200
1700
1900
2200
2300
2400
3100
3200
3300
ExtremeWare XOS 11.3 Command Reference