enable vman termination
enable vman termination {ports <portlist> | multilink <groupname>}
Description
Enables VMAN termination for T1 and E1 ports.
Syntax Description
portlist
groupname
Default
VMAN termination is disabled by default.
Usage Guidelines
This command enables VMAN termination for T1 and E1 links. There is no equivalent command for T3
links.
Example
The following command enables VMAN termination on ports 1:1 and 1:3:
enable vman termination ports 1:1,1:3
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare Software 7.0.0 Command Reference Guide
A list of ports.
A multilink group name.
enable vman termination
1353