Configure Protocol Delete - Extreme Networks ExtremeWare Command Reference Manual

configure protocol delete

configure protocol <protocol_name> delete <protocol_type> <hex_value>
{<protocol_type> <hex_value>} ...
Description
Deletes the specified protocol type from a protocol filter.
Syntax Description
protocol_name
protocol_type
hex_value
Default
N/A
Usage Guidelines
None
Example
The following command deletes protocol type LLC SAP with a value of FFEF from protocol fred:
configure protocol fred delete llc feff
History
This command was first available in ExtremeWare 1.0.
Platform Availability
This command is available on the "i" series platforms and on the Summit 400-48t.
ExtremeWare 7.5 Command Reference Guide
Specifies a protocol filter name.
Specifies a protocol type. Supported protocol types include:
• etype – IEEE Ethertype.
• llc – LLC Service Advertising Protocol.
• snap – Ethertype inside an IEEE SNAP packet encapsulation.
Specifies a four-digit hexadecimal number between 0 and FFFF that represents:
• The Ethernet protocol type taken from a list maintained by the IEEE.
• The DSAP/SSAP combination created by concatenating a two-digit LLC Destination SAP
(DSAP) and a two-digit LLC Source SAP (SSAP).
• The SNAP-encoded Ethernet protocol type.
configure protocol delete
369