configure protocol delete
configure protocol <name> delete [etype | llc | snap] <hex> {[etype | llc |
snap] <hex>} ...
Description
Deletes the specified protocol type from a protocol filter.
Syntax Description
name
hex
Default
N/A.
Usage Guidelines
Supported protocol types include:
• etype – IEEE Ethertype.
• llc – LLC Service Advertising Protocol.
• snap – Ethertype inside an IEEE SNAP packet encapsulation.
Example
The following command deletes protocol type LLC SAP with a value of FEFF from protocol fred:
configure protocol fred delete llc feff
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a protocol filter name.
Specifies a four-digit hexadecimal number between 0 and FFFF that
represents:
•
The Ethernet protocol type taken from a list maintained by the IEEE.
•
The DSAP/SSAP combination created by concatenating a two-digit LLC
Destination SAP (DSAP) and a two-digit LLC Source SAP (SSAP).
•
The SNAP-encoded Ethernet protocol type.
configure protocol delete
233