Monitoring Rsvp-Te Profiles And Mpls Tunnel Profiles; Table 79: Show Mpls Phb-Id Output Fields; Table 80: Show Mpls Profile Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

Related Topics

Monitoring RSVP-TE Profiles and MPLS Tunnel Profiles

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.

Table 79: show mpls phb-id Output Fields

Field Name
phb-id
traffic-class
color
show mpls phb-id
Display a specific RSVP-TE or tunnel profile, or all RSVP-TE or tunnel profiles.
To display the default RSVP-TE profile:
host1:pe2#show mpls rsvp profile default
RSVP profile default: used by 0 interfaces
refresh period: 30000 ms
timeout factor: 3
To display all MPLS tunnel profiles:
host1#show mpls tunnels profile
MPLS Tunnel Profile tunnelProfile
LSP setup using rsvp-te
tunnel not announced to any IGP
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is route
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is no route
metric is relative 0
path option 2
path to be dynamically calculated by isis
destinations include: 1.1.1.1 2.2.2.2 3.3.3.3
ISIS Level 2 routers
OSPF border routers
Table 80 on page 357 lists the show mpls profile command output fields.

Table 80: show mpls profile Output Fields

Field Name
profile
refresh-period
timeout factor
Field Description
Per-hop behavior ID for which a traffic class/color combination is
displayed
Traffic class associated with traffic
Color (drop precedence) associated with traffic, green, yellow, or
red
Field Description
Number of interfaces that use the profile
Timeout period in seconds between generation of refresh messages
Number of refresh messages that can be lost before the session is
ended
Chapter 5: Monitoring MPLS
357