Table 66: Show Radius Dynamic-Request Statistics Output Fields - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide
Table 66 on page 270 lists show radius dynamic-request statistics command output
Meaning
fields.

Table 66: show radius dynamic-request statistics Output Fields

Related Topics
270
Monitoring RADIUS Dynamic-Request Server Information
Field Name Field Description
IP Address IP address of the RADIUS server
Udp Port Port on which the router listens for RADIUS server
Disconnect Status of RADIUS-initiated disconnect feature, enabled or disabled
Change of Status of change of authorization feature, enabled or disabled
Authorization
Secret Secret (key) used to connect to RADIUS server
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA requests received
Requests
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA requests accepted
Accepts
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA requests rejected
Rejects
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA messages rejected
No Session ID because the request did not include a session ID attribute
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA messages rejected
Bad Authenticators because the calculated authenticator in the authenticator field of the
request did not match
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA packets dropped because
Packets Dropped of queue overflow
No Secret Number of messages rejected because a secret was not present in the
authenticator field
Unknown Request Number of packets received with an invalid RADIUS code for RADIUS
disconnect or change of authorization
Invalid Addresses Number of invalid addresses received
Received
show radius servers
show radius statistics